新闻详情当前位置:首页-搬家家具受伤补救小窍门
    搬家家具受伤补救小窍门
    2013-9-18 11:45:32

        搬家是一件很麻烦的事情,尤其的对于大件家具和电器的搬运。那么,在搬运过程中,也难免会碰到一些剐蹭、磕碰等情况。章丘搬家公司在这里给您介绍一些补救家具磕碰划痕的小窍门。
        The move is a very troublesome thing, especially for large furniture and appliances handling. So, in the course of handling, it will inevitably encounter some rub, bump etc.. Zhangqiu moving company to introduce you to some of the remedial furniture bump scratch tips here.
        1、铰链松动 可取一细如筷子的木料,削尖涂上白胶水塞于木螺丝孔内锤进,锤进后折断木条,章丘搬家公司http://www.zqhjybj.com/再将木螺丝重新旋进,即可旋紧。
         the hinge loose desirable a fine as chopsticks sharpened wood, painted white water plug in - hole into the wood screws, hammer into the wood after the break, Zhangqiu moving company and the wood screw is screwed into the back, you can tighten.
      2、油漆污点,油漆滴在家具上,未干时可用有蜡水的布抹掉,或用钢丝绒蘸上蜡油轻轻擦拭。如油漆已干,则可把亚麻籽油滴在油漆上使之变质,然后用布抹掉,再用灰石和蜡油磨光即成。
         paint stain, paint drops on the furniture, not available with wax cloth to erase, or steel wool dipped in wax oil gently wipe. If the paint is dry, can put metamorphic flax seed oil droplets in the paint to make, and cloth to erase, and grey stone and wax polished into.
      3、油漆剥落,清漆家具表面小块油漆剥落后可取同色广告颜料涂补,再用清漆涂在表面,即完好如初。
          peeling paint, varnish surface of small pieces of furniture, paint peeling off the desirability of the same color poster paint coating, and then varnish coating on the surface, i.e. intact.
      4、火灼损伤,先将火灼过的木质用刀片除去,再用钢丝绒擦干净,然后用补家具的胶木填好,油磨平滑,再用家具蜡磨光。
          fire damage, to the wood burning blade to remove, and then steel wool clean, and then use s Furniture bakelite fill oil, grinding smooth, use furniture wax polish.
      5、抽屉磨损 抽屉道磨损大,可将抽屉拉出翻身,搬家公司用电烙铁在抽屉道上烫层蜡烛油,使油液渗入木质。用同法在桌柜相应的道上也烫上蜡烛油,就可减少抽屉磨损。
         wear drawer drawer road wear, can pull the drawer turn over, moving companies use electric iron layer candle oil in a drawer Road, the oil liquid penetrate wood. Cabinet table with the same method in the corresponding channel is also hot on the candle oil, can reduce the wear drawer.
      6、金属家具除锈 可用纱布蘸少许缝纫机油将锈斑擦净,露出锈蚀处再用1号细水磨砂纸擦除锈迹,用纱布将锈屑油污揩净,然后以2?誜3比例将油漆与松节油调配,均匀涂在锈蚀处。
         metal furniture rust with gauze dipped in a little sewing machine oil will rust cleaning, corrosion and exposed at then 1 fine water sand paper to wipe away, with gauze will rust oil wipe, and then to 2? Shua 3 proportion will paint with turpentine deployment, evenly coated in rust.
      7、电镀家具除锈,小件可放入盛有机油的盆里浸泡除锈;大件可用刷子或棉纱蘸机油涂于锈处,章丘搬家公司http://www.zqhjybj.com/片刻后再来回擦拭,即可除去锈迹。
        plating furniture cleaning, small pieces can be placed in the oil bowl soaking cleaning; large usable brush or cotton dipped in oil coating on the rust, Zhangqiu moving company then come back clean, you can remove the rust.
      8、漆泽暗淡木家具漆面光泽的恢复有两种办法。一是用半杯清水加1/4杯醋,用软布蘸之擦拭。二是用酒精或花露水、茶水浸湿软布轻拭一二次,再擦一遍地板蜡。
         paint Ze dim wood furniture lacquer gloss restoration in two ways. A half cup of water is used to add 1/4 cup vinegar, wipe with a soft cloth dipped. The two is to use alcohol or toilet water, tea and soft cloth soaked swab for one or two times, and then wipe the floor wax.